LightSpace Connect User Guide

Profile mobile phone screens, tablets, and connected TVs, monitors and displays

LightSpace Connect Overview

LightSpace Connect Profiling

LightSpace Connect is an Android and iOS App that enables the generation of calibration patches for the measurement and profiling of any Android or Apple mobile phone or tablet screen, as well as any TV or other display/monitor through the use of Screen Mirroring, MHL Cable, AirPlay, Apple Digital AV Adaptor, Fire TV & Google TV devices, etc.

As LightSpace Connect is controlled directly by LightSpace CMS it can generate any required colour patches, either as a managed sequence for automated profiling, or manually selected for manual display calibration adjustment.


Initial Operation

In the App Store, Play Store, or on Amazon search for 'LightSpace Connect', and select and install. When installed, tap on the LightSpace Connect icon to open the app.

Make sure both the LightSpace PC and the LightSpace Connect app device are connected on the same WiFi network.

When open, the app will initially show a splash screen, and then swap the the main 'connect' page, ready to connect to the LightSpace CMS PC.

The Network Manager menu is located within the top-level icons of LightSpace CMS.

Patch Indent/Size & Extra Delay

LightSpace Connect Network

The Patch Indent/Size & Extra Delay controls within the LightSpace Network Manager can be used to set any specific patch size and position for display profiling, as well as a delay for probe measurement.

The 'Diagonal' box enables the selection of patches based on the ICDM Lxx sizes, which are defined as a percentage of the screen diagonal size. The 'Area' box shows the equivalent screen area percentage for the selected patch. It is possible to enter the desired area percentage manually.

The 4 indent values are also in percentage terms, and can be used to set a Custom width and height of the patch window, as well as the position.

To reposition the patch you simply add/subtract the same value from the apposing percentage boxes, which will reposition the patch, while maintaining the same patch size.

The 'Extra Delay Time' setting is a duplicate of the same setting with the 'Options' menu, as allows for a delay time in seconds to be set before the probe starts reading after a patch change has occurred. This is required when using an external patch generator (such as LightSpace Connect) with an in-built delay, meaning the patches on the display being profiled occur out of sync (delayed) with respect to the patch changes within LightSpace. Such a delay is easy to see visually, and a corresponding value entered to counter the visual delay.

Extra Delay

Note: The Network Manager can be accessed during a Display Characterisation, enabling the patch size, position, and BG colour to be adjusted during profiling. Depending on the patch generation system being used, it may be preferable to use the 'Pause' button within the Calibration Status window, to pause the profiling before making such adjustments.

LightSpace Connect Network

LightSpace connect is now ready to mimic any patch colour selected within LightSpace CMS.

Note: If you have any connection issues check for any Firewall settings preventing connection.


Profiling Operation

To activate the LightSpace Connect patch generator navigate to the desired profiling mode within LightSpace CMS - Calibration Interface, or Display Characterisation.

When the patch window is activate within LightSpace (the LightSpace CMS internal floating patch window has been made active by clicking the small colour display box when using Quick Profiling or Manual Measure modes) the LightSpace Connect patch generator will mimic the colour displayed within LightSpace CMS.

Profiling can then be performed as normal, using the probe connected to the LightSpace CMS PC, with LightSpace Connect displaying the required patches on the mobile device screen, or connect TV/display/monitor.

LightSpace Connect Workflows

TV Legal Profiling Workflows

Some LightSpace Connect devices (such as Chromecast) may need rescaling for TV Legal ranges when profiling. This can be performed using the 'Patch Scale' function within the 'Options' menu to re-scale the colour patches correctly.

Note: To gauge if a rescaling is needed use the 'Calibration Interface' menu, and use the 'Patch Colour' function to toggle the IS-mini patch output colour between the Black patch [000] and Grey [013]. If there is NO visible or measurable difference between the two patches a rescaling will be required as the output signal is being clipped.